How to install solar panel: A solar inverter with computerized controller, a mounting system, and solar panels (modules) make up solar systems. DC power is generated by solar panels using sunlight. The generated electricity is then converted into AC by the inverter so that it may be used in the home. The solar system is managed and optimized by the computerized controller. A solar battery is necessary if you want a battery backup system or an off-grid solar system.
Considering switching to solar energy? To achieve optimal performance and the greatest possible energy savings, it is essential that your solar panels are installed by experts. In order to help you find the best bargain, Hokdigital has a network of reputable and skilled solar panel contractors that will offer you reasonable quotations.
Solar Panel Installation Process
The most common location for the installation of solar PV
panels is the roof
. Most roofs typically have the desired specifications for the installation, so that panels get the maximum sunlight
Nevertheless, if installation on the roof is not applicable or desired, the solar panels could also be mounted on the ground
. You just need to make sure that there are no objects blocking access to the sun
The following steps explain solar panel installation on a roof:
1. Construct a scaffold
To ensure safety when performing the installation while on the roof, you must first create scaffolding.
2. Install solar panel mounting systems
The solar panel mounting system must then be installed. The solar panels’ foundation will be supported by this. To receive the most sunlight, the entire mounting structure must be inclined at an angle of 18 to 36 degrees.
3. Setup Solar Panels
The solar panel itself needs to be mounted on the mounting framework after the mounts are set up. you ensure that it remains stable, make sure you tighten all the bolts and nuts.
4. Install Solar Panel Wiring
The installation of the electrical wire is the following stage of the installation process. MC4 connectors are typically utilized since they are appropriate for all types of solar panels. Make sure to turn off the home’s energy supply while installing the wiring.
5. Put in a solar inverter
The solar inverter must then be linked to the system after that. Usually situated close to the main panel, it may be either indoors or outside. If kept in a colder environment, inverters operate more effectively.
If the inverter is outside, it needs to be protected from the midday sun. If it is installed indoors, the garage or utility room are typically the best locations because they have airflow and stay cool for the majority of the year.
6. Bond Solar Inverter and Solar Battery
Thereafter, the solar inverter
has to be connected to the solar battery
. The solar battery storage can save you from worrying about the lack of usable energy during cloudy times
, it can also lower the solar panel battery costs during installation.
7. Connect the Inverter to the Consumer Unit
The inverter should be connected to the consumer unit
to generate electricity. A generation meter should also be connected to monitor
the amount of electricity the solar panels actually produce. You can use your computer or other device to check your solar system’s performance
. For example, you can check how much electricity you generate at different times and decide what time is suitable for using your washing machine or other utilities.
8. Start and Test Solar Panels
The final step is to switch the power on and test
the newly installed solar panel system. After that, the solar panel installation process is completed.
Solar Panel Maintenance
Since there are no moving parts, solar panels require very little maintenance
. Once you have covered the installation cost of solar panels
, there are not many costs associated with maintaining them.
Having said that, you should inspect them a few times per year for dirt or some other things that might have piled on top. It is important that the panels are clean
and there is nothing blocking them from efficiently absorbing the sun
Before cleaning the panels yourself, you should consult with your installer about the warranty conditions
. Some solar panel manufacturers could terminate the warranty if any self cleaning is done.
For a general cleaning, you can just use a normal garden hose to wash the face of the panels. You should do this in the morning or evening. Also avoid spraying them with cold water
while they are hot because that might damage them.
Moreover, If the panels need some more cleaning that the hose cannot provide, you can use a sponge with soapy water to scrub them. You can also get the services of a cleaning company
. This is advisable if the panels are too high or need more thorough cleaning.
You should have your system examined every 4-6 years
by an installer. It is also a good idea to ask your installer about specific maintenance requirements for your solar system.
If you want to take the next step and get solar panels for your home, then look no further. Fill in the contact form
to compare up to 3 quotes from suppliers near you. GreenMatch’s service is free of charge
and without further obligations.